Easy 192.168.10.1 Login & WiFi Repeater Setup

192.168.10.1 Login & WiFi Repeater Setup

If you are asking “How do I log into my 192.168 10.1 IP address?”, this article on 192.168.10.1 login & WiFi repeater setup is the answer for you!

192.168.10.1 is a private IP address assigned by many manufacturers as a default gateway to the setup wizard or administrative console of a router.

Once logging into the admin panel of your router, you can easily change the name and password of your wireless network, configure your router and turn on other security options to protect your network from being hacked or used by strangers.

We also provide you the complete guide to 192.168.10.1 WiFi repeater setup in this post. Stay tuned!

Easy Steps To 192.168.10.1 Login Admin

First, make sure your device (computer/laptop/mobile phone) is connected to the network of a router that you are trying to configure.

Step 1: Open your favorite web browser. Copy and paste 192.168.10.1 into the address bar or simply click the link below:

http://192.168.10.1

Step 2: A admin page will ask you to fill in username and password. If you have never changed it before, it means that you could try one of the below credentials options.

192.168.10.1 login admin, 192.168 010, 10.192 168.1 0
192.168.10.1 login admin

If you encounter any problems entering the admin page, or the site is loading and nothing shows up in your screen, there are some potential reasons.

The first reason might be that your device lost its connection to the network. The solution here is to check your router status, make sure the lights for Power, WAN, LAN and WLAN are on.

The second reason for the page not responding is that you mistyped the URL. Please check again your address bar. The correct IP address should be 192.168.10.1, when common misspellings are 192.168 10.1, http 192.168.o.10.1 login, 192.168.l.10, 192.168 l 10, http 192.168 o 10.1 login, http 192.168 l 10.1 login, 10.192 168.1 0, or 192.168 010.

The third reason for the page not responding is that the admin credentials for your router has been changed and now you cannot remember it. In that case, the solution is to reset your router to its factory settings by pressing the RESET button on the side or back of your router, hold it for 15 seconds and then restart it. Please note that it’s a small button and you may need to use a paper clip to press it more easily.

10.192 168.1 0, 192.168.10.1 login & wifi repeater setup, 192.168.10
192.168.10 1 – 192.168.10.1 login admin

How to Login Admin 192.168 010

A common misspelling for 192.168.10.1 is 192.168.010 – 192.168 010, that is actually a correct IP address – 192.168.0.10. If your router network is assigned to this IP, here is how to login the admin panel.

Type 192.168.0.10 into the address bar of your internet browser, or click the link below:

http://192.168.0.10

Step 2: Use one of the options below for username & password.

Login Admin 192.168 010, 10.192 168.1 0, 192.168.10.1

192.168.10.1 WiFi Repeater Setup

If your router network is shaky or if you cannot access your wireless network in some places of your house and you are concerned about that, we recommend using a Wi-Fi Repeater. This is a device that helps broaden the wireless range and maximize the internet speed of your home network.

The common addresses that many people use to setup and configure their WiFi extenders is Ap.setup or 192.168.10.1, because 192.168.10.1 is the default IP address for these Wifi extenders.

First, after you unbox the extenders, plug it into the socket.

The next step is to connect your extender to your device like computer, laptop, or cell phone. The method to 192.168.10.1 wifi repeater setup is different depending on the device you use.

192.168.10.1 wifi repeater setup when using smart phone

  1. Go to your Settings-> WiFi list. Search for the wifi signal of your repeater. The repeater default network name is written on the back of the device.
  2. Connect your phone to the WiFi repeater.
  3. Open a web browser like Chrome or Safari on your phone, type: 192.168.10.1 on the address bar, or click on the link below: http://192.168.10.1
  4. Or you can try using this local website Ap.setup instead of using 192.168.10.1.
  5. Click Enter, and then the login page for your WiFi repeater will appear.
  6. Type in the credentials / for username and password.

192.168.10.1 WiFi Repeater Setup Using Computer

The method to setup your new WiFi repeater using computer and the IP 192.168.10.1 is the same as using a smart phone we mention above. However, if the default IP address of your computer is not 192.168.10.xx, then that’s the reason why it cannot connect to the repeater.

The solution given here is to change the IP address of your computer to “Automatically obtain an IP address”.

For Windows 10:

  1. Right Click on the icon “Windows Start”  to open the context menu.
  2. From the menu, click Control Panel.
  3. Select Network and Sharing Center.
  4. Select Change adapter settings.
  5. Select Ethernet or Wi-Fi -> then choose Properties.
  6. Tab on Internet Protocol Version 4 (TCP/Ipv4), then click on Properties.
  7. Select Obtain an IP address automatically and Obtain DNS server address automatically.
  8. Click OK to exit the Internet Protocol Version 4 (TCP/IPv4) Properties.
  9. Click Close to exit the Ethernet Properties.
  10. Click Close once more.

For Windows 8/8.1:

Right-click the Network icon located on the Windows Taskbar.

Click on Open Network and Sharing Center.

On the left side of your window, click Change adapter settings .

Right-click on Local Area Connection or Wireless Networking Adapter and click on Properties.

Scroll through and select Internet Protocol Version 4 (TCP/IPv4) and click Properties.

Click on Obtain an IP address automatically, then click OK to exit.

For MacOS:

Click the Apple icon on the top left of your screen. Select System Preferences.

Click on the Network icon.

Select Ethernet (for wired connection) or Wi-Fi (for wireless connection) -> Advanced.

192.168.1.1

Click TCP/IP.

From the Configure IPv4 drop-down list, select Using DHCP and click the OK button.

192.168.l0.1 msrm, 192.168.10.1 wifi repeater reset
192168101 login admin – Wi-Fi repeater setup

The above method is applied to most models of Wi-Fi repeaters, such as the MSRM US750, MSRM US3000, Comfast US750, Wireless-N Repeaters, and WavLink AC2100 WN583A6 Boosts WiFi Signal.

If you use a MSRM US302 WiFi extender, the login admin you should type in the web browser should be 192.168.1.1 or http://ap.setup, instead of 192.168.10.1.

A login page will open and then, enter ’ in the dialog boxes for both username & password.

Above is the complete guide to 192.168.10.1 Login & 192.168.10.1 WiFi Repeater Setup. In our site, we provide you solutions for common IP address issues such as 192.168.1.1 and 192.168.0.1 to help you recover your router performance and enhance a stable internet connection! If you have any questions, please leave a comment below.