Login Admin and Wireless Settings

If you want to search for 192.168.l.l or login admin, you may have problems with your internet or Wi-Fi setting. Many people encounter the same problem with their networks as you do, and here is the solution for you.

What is It’s an IP address that many router companies use as an access point or gateway. Companies usually set up admin access to these addresses so network administrators have the ability to configure their routers and networks.

IP addresses come in 4 numbers with a dot (.) in between. Home networks are typically 192.168 IP address such as 192.168.x.x while routers are often 192.168.1.*, 192.168.*, or 10.*. However, you might need to check your computer/device for its specific number.

19216811 IP address is the default IP address for many routers, but in a very unfortunate turn of events, it also happens to be identical to the l in lowercase l and the number “1”, which makes it very easy for accidental typos to happen. So we often end up typing 192.168.l.l, http 192.168.l.1, 192 l.168.1.1, 192.168.l.1, 192.168 ll, 168.192.l.0, 192 l.168.0.1, 192.168.0.l, 192 l.168.0.1, 192.168 l l0, 192.168 l78, instead of the correct IP.

If you’re like most people, you often use auto-correct when typing your passwords or usernames – so you can imagine how often people enter the wrong IP address such as 192.168.l.l or 192.168.0.l.

How to login admin 192.168.l.l
How to login admin 192.168.l.l

Here is your guideline to avoid making the most common mistake of internet users, so you never enter an incorrect IP address again! Let’s login to admin settings of your router and then you can change password for your network.

How to Login Admin

If you want to change the default settings and configurations that your router software provides, the common and easy method is to access 192.168.l.l IP address and then access your router admin. Then you could change your admin password.

Step 1:

Type in the address bar of your web browser or click on the button below:

19216811 admin login

Step 2:

If you can access the link, enter the username and password that you want to use into the login page. You will now be logged in to the Admin Panel of your router.

Step 3:

If there’s an error, it means that 192.168.l.l or 19216811 is not your router’s IP address. How to find your exact router’s IP address? Depending on the device/computer you use, the method is different.

  • Windows: To open the command line, enter ‘cmd’ in the search bar. Then type ‘ipconfig’. The default gateway address should be listed (if it is).
  • MAC OS: Click the Apple Menu icon that is topmost on the screen. Choose ‘System Preferences’. Click the Network icon and then choose your network connection. Press the “Advanced” button and navigate to the “TCP/IP” tab to see the current IP address.
  • Linux: To find your router’s IP address, click on “Applications” and “System Tools”, then open Terminal. Type ipconfig and the router’s IP will be displayed below “inet addr”.
  • iPhone iOS: If you use iOS 9 or 8, navigate to Settings ->WiFi, and click the wireless network to which you are currently connected. Look at the DHCP to find out what your router’s IP is.
  • Android: Wi-Fi Analyzer is a third-party app for Android that can show you all the nearby WiFi networks. To do so, install the app and open it. Click “View” -> “AP list”. You’ll see a list of networks, with connecting Wi-Fi to one at the top of the list. Simply by tapping on it, you can find out your own network name and more info, including your router’s IP.

Step 4:

Once you know your router’s IP address, type it into the URL address field of your web browser. You’ll be directed to the login panel, then type your router username and password there.

If you have no idea what your username and password for your IP 192.168.l.l or 168.192.l.0 , no worries! Let’s try out the list of popular username/password here. Top 1 is admin/admin.

Login usernamePassword

If you forgot your password or simply want to recover your default password, reset your router to factory settings by these easy steps below, no need for technical skills!

How to Reset Admin Password to Default Router

A router password is a password that protects your home network from unauthorized access. If someone knows the router password, they can connect to the network and start using your internet connection, or even steal your private data and personal information.

In case the password to access your router may have been changed and you can’t find the password, you could try resetting the router. This is a simple process that will change your default password to the default settings.

  1. Look for a small RESET button, normally on the back or side of your router.
  2. Use a paper clip, press and hold that button for 12 – 15 seconds. Then your router will reboot itself. All settings will be back to factory settings. admin password reset router admin password reset router

Look for 168.192.l.0? It’s actually the IP Address Login

If you are searching for 192 l.168.0.1, it is This is a private IP address that is often the default address for certain broadband routers – mostly NETGEAR and D-Link models. 168.192.l.0 is a common IP misspelling, alongside 192.168. 1.1, 192.168.1, http 192.168.l.1, 192.168.1., 192.168 1.1, 192.168.l.1, 192.168 ll, 192 l.168.1.1, 168.192.l.0, 192 l 168.0 1 or http192 l.168.0.1.

How to login admin Type into your web browser’s address bar or click on the link below.

Login admin https://

Default login and password for IP address

43 % Username: admin Password: admin

20 % Username:admin Password: password

17 % Username: – (blank) Password:admin

7 % Username:- (blank) Password:Admin

4 % Username: admin Password:- (blank)

Here under the guidance if you want to know more about Troubleshooting IP Address, or 192.168.168 (misspelling)

Open a browser, Type into the address bar, or click the link:

  • Username: admin Password: password IP Address

Open a browser, Type into the address bar.

  • Username: admin Password: admin
  • or try : Username: admin Password: [none] IP address or common misspelling as 192.168 1 2, 192.168.l.l2

Open a browser, Type into the address bar, or click the link:

Try one of the user and password below:

  • Username: [None], Password: Admin
  • Username: [None], Password: admin
  • username: admin, Password: admin IP address (common misspelling as 192.168 l l0)

Open a browser, Type into the address bar.

Try one of the pair below for username and password:

  • Username: admin Password:admin
  • Username: [none] Password:admin
  • Username:’randomly generated” Password:admin
  • Username: admin. Password: [none]
  • Username:admin Password: motorola

If you need more info on this IP address and how to use that to set up your Wi-Fi repeater, here is the complete guide too Easy Login & WiFi Repeater Setup.

How to Change the Default Router – Change Password

The default gateway IP usually comes pre-assigned by company. However, a user can configure it to meet their needs depending on the need. This is often changed in order to prevent illegal access and prevent denial of service attacks.

TP-Link Router Login: 

  1. Login to your default admin panel at or (username: admin, password:admin)
  2. Go to Advanced settings > Network > LAN.
  3. Under “IP Address” field you may change it to your desired address such as
  4. Save it and the router will reboot to apply the changes.

D-Link Router Login

  1. Login to your router configuration page (username: admin & password: admin/blank)
  2. Go to Setup > Network Settings.
  3. Now you will find Router IP Address field.
  4. Change it as preferred and Save Settings.

NETGEAR Router Login:

  1. Login to NetGear router settings page via or or you can access via http://www.routerlogin.net or http://www.routerlogin.com.
  2. By default, the username is admin and password is password.
  3. Once logged in navigate to Advanced > from left side menu go to “Setup” > LAN Setup.
  4. Under LAN TCP/IP Setup, you will see IP Address. Change as preferred.
  5. Apply Changes and the system will reboot to update settings. Linksys Router Login Admin IP address can be accessed from your device if it is connected to the Linksys Router’s WiFi network. Follow these steps to access:

  1. Open a browser, type “” in the address bar.
  2. Enter your Username and Password, then click the “Login” button. You can use the default Admin username and password to log in (by entering “admin” for both).
  3. You will be logged in to your router’s web interface.

How to change 192.168.l.l Linksys Router WiFi password?

  1. Login to Linksys web interface.
  2. Go to Wireless/Configuration > Wireless Security.
  3. Select “WPA2 Personal” in the “Security Mode“.
  4. Enter your new router password in the “Passphrase/Pre-Shared Key” field.
  5. Click “Save Settings” and your new settings will be saved.

How to change Linksys Router Network Name (SSID)?

  1. Login to Linksys web interface.
  2. Go to Wireless/Configuration > Basic Wireless Settings > select Manual (if prompted).
  3. Enter your preferred WiFi name in the Network Name (SSID) field.
  4. Click “Save Settings” and the changes will be saved.

Once you’re in the router’s admin panel, you’ll be able to modify and change all internet settings.

How to Set Up Your Router in 5 Easy Steps 

Setting up a new router is not a complicated task as long as you have followed the instructions. This guide will help you to set up your new Linksys router. You will need to follow these steps to get it running in no time.

Step 1:

Check if there is an internet connection. Choose a place for your new router, remember to bring your manual, default password and username with you. Connect the router to a power supply and your PC with an Ethernet cable.

Step 2:

Plug the internet cable in the WAN (wide-area network) port at the back of the device and wait for it to connect. You will see the LED light on your router which is for internet connection going green.

Step 3:

On your computer, open a web browser and type into the address bar and hit enter or click on enter on your keyboard. Make sure that you copy the above characters. not to type. You may type the wrong IP like many other users do, they come up with 192.168.l.l, 192.168. 1.1, 192.168.1, http 192.168.l.1, 192 l.168.1.1 , http 192.168.l.l and similar.

Step 4:

In your router’s login page, enter in your default username and password in the manual or router’s box.

Step 5:

Once logged into your router, go ahead and change its name from “linksys” or “Netgear”, “TP-link” to something more personalized like “John’s Linksys Router.” This makes it easier for you to connect to it in the future. Save your settings by clicking “Apply Settings”.

After following these steps, you’ll be ready to use your wireless network, or change password and username later.

192.168.l.l linksys router login Troubleshooting Router

In the event that something goes wrong, you can always reset to factory settings and have your router back to how it was when it came out of the box.

Protecting your WiFi network is important to prevent unauthorized access. Some ways to do this are by enabling WPA2 encryption, setting a strong password, disabling the use of the outdated WPS. One additional way you can protect your WiFi network is by enabling MAC-address filtering which adds an extra layer of security.

Above is the complete guide to login admin 192.168.l.l or, alongside the common IP address 168.192.l.0. We hope that your internet is now working smoothly, protected by a strong password, and you could keep yourself safe whenever you go online.

Read more:

Complete Guide To 192.168.l.254 Gateway

Simple Guide to –